Molyneux Industries, Inc. is a leading designer and manufacturer of adjustable crane rail clips, crane rail pad, tie back links (girder surge connectors) and customized engineering solutions for crane runways. Molyneux Industries is a U.S. based corporation with a global presence . After more than a quarter century of commitment to the material handling industry we offer the most exceptional variety and highest quality products for crane runway systems.
Crane Rail Clips come in two basic clip adjustment types. One adjustment type features a circular adjustment cam that locks the clip into position against the rail. The other adjustment type features a slotted hole with a wedge tightening & locking action.
|
|
| Crane Rail Clips: |
|
Tightening Adjustment
- Weldable & Interlocking adjustable crane rail clips.
- MX15 , MX20 , MX24 , MX43
- 9116 , 9119 , 9219 , 9519
- Metric: 9116 , 9120 , 9220 , 9520
|
 |
Cam adjustable rail clip
- Welded Platform Base adjustable crane rail clips.
- SD96R/Series , S94R/Series , S73R/Series , S95CR5/Series
|
 |
Cam adjustable rail clip
- Welded Stud adjustable crane rail clips.
- CL/Series (Pressure Block Nose)
- W/Series (Pressure Block Nose)
- CD, BD, AD/Series (Plain Nose)
|
 |
Cam adjustable rail clip
- Welded Boss adjustable crane rail clips.
- W/Series (Pressure Block Nose)
- W/Series (Plain Nose)
|
 |
Cam adjustable rail clip
- Through Bolt adjustable crane rail clips.
- CL/Series (Pressure Block Nose)
- CLX/Series (Pressure Block Nose)
- W/Series (Pressure Block Nose)
- CD, BD, AD Series (Plain Nose)
|
Crane Rail Pads:
|
Several crane rail pad types are manufactured by Molyneux Industries. Steel reinforced crane rail pad and moderate duty crane rail pad provide continuous support of the rail. Molyneux Industries also manufactures rail pads for intermittent rail support systems. Examples of each pad type are shown below. |
|
 |
Steel Reinforced Crane Rail Pad
Steel reinforced crane rail pad is available for heavy duty crane runway applications. |
 |
Moderate Duty Crane Rail Pad
Moderate duty crane rail pad is used for moderate duty crane runway applications. |
 |
Intermittent Crane Rail Pads
Molyneux IP crane rail pads are designed for runways where the rails are discontinuously supported. |
Tie Back Links:
|
Molyneux Industries manufactures two types of tie back linkages which are used to allow crane girder end rotation on overhead crane runways. These bearing tie back linkages prevent the kind of fatigue failures that are common with traditional fixed tie back (diaphragm) connections. The Molyneux PFSL type tie back linkage has internal bearing seals. The TBL type tie back linkage is installed with external o-ring seals. Examples of both types of linkages are shown below. Both the TBL and PFSL type tie back links are available in a large variety of sizes and can be custom designed and manufactured by Molyneux to fit almost any project requirement. |
|
 |
PFSL Bearing Tie Back Link
(Internal Seals )
This tie back link is faster and easier to install on site and provides some dimensional flexibility over the TBL/Series. The PFSL type tie back link is available to ship as an assembly or as the link only . |
 |
TBL Bearing Tie Back Link
(External Seals )
This tie back link offers a slightly cheaper design solution in many instances. This link series allows a wide variety of connection solutions. The TBL type tie back link is generally shipped to site pre-assembled. |
| Tie back links are generally custom made to suit each project. We can manufacture more sizes than those displayed on our tabulated list of available tie back links. |
